58
CONTROL PANEL (OPTION)
NOTE:
On a boat equipped with quadruple engines,
use two control panels which are for dual
engine. When operating the SELECT, THROT-
TLE ONLY and SYNC function, all four engines
are controlled by either control panel switch.
For single
engine
For triple engine
For dual engine
For quadruple engine
Start & Stop Switch
This is a switch to start and stop the engine.
The engine can be started with the remote con-
trol handle at the neutral position.
Station Select Switch
This switch control between driving stations on
boats equipped with more than one driving sta-
tion.
When pushing the select switch to select sta-
tion, SELECT LED on the control panel at the
driving station selected comes on, and the
SELECT LED at the driving station not selected
goes out.
This switch is enabled only when the remote
control handle at the 1st and 2nd driving sta-
tions are at the neutral position.
NOTE:
If equipped with Keyless Start System:
When the Keyless Start System has been
turned to ON state by operating the main
switch, the 1st driving station is automatically
selected. By operating this switch with the
remote control handle in positions other than
the neutral, the SELECT LED blinks and the
buzzer sounds at the same time.
If not equipped with Keyless Start System:
When the main switch is turned ON, the 1st
driving station is automatically selected. By
operating this switch with the remote control
handle in positions other than the neutral, the
SELECT LED blinks and the buzzer sounds at
the same time.