35
MOTOR REMOVAL AND
TRANSPORTING
MOTOR REMOVAL
If it is necessary to remove the outboard motor
from your boat, we recommend that you ask
your authorized Suzuki Marine Dealer to do the
work for you.
MOTOR TRANSPORTING
When transporting the motor, place the motor
either vertically or horizontally.
Vertical transport:
Attach the clamp bracket to a stand by securing
two transom bolts.
Horizontal transport:
1. Drain the engine oil. Refer to the ENGINE
OIL section.
2. Drain the gasoline from the vapor separator
as follows:
(1)Remove the motor cover.
(2)Pull the drain hose end 1 out.
(3)Loosen the air vent screw 2.
(4)Loosen the vapor separator drain screw 3
and drain the gasoline into a suitable con-
tainer.
(5)After draining, retighten the screws 2 and
3, and then put the drain hose back.
3. Rest the motor on a case protector with the
port side downwards as shown.
WARNING
Gasoline is extremely flammable and
toxic. It can cause a fire and can be haz-
ardous to people and pets.
Use a proper, safe container to store any
gasoline drained from the outboard
motor. Keep gasoline away from sparks,
flames, people, and pets.
To Next Page
Loading...
Need help?
General
