7-5
MOTORCYCLE CLEANING
Follow the instructions below to
prevent water from entering the
engine through the air cleaner
element when cleaning the motor-
cycle.
• Cover the element with a plas-
tic bag.
• Install the seat.
• Cover the inlet holes on the
frame covers in order to pre-
vent water from entering the
air cleaner box.
• Do not spray high pressure
water to the air cleaner box.
Washing the Motorcycle
When washing the motorcycle,
follow the instructions below:
1. Remove dirt and mud from the
motorcycle with cool running
water. You may use a soft
sponge or brush. Do not use
hard materials which can
scratch the paint.
2. Wash the entire motorcycle
with a mild detergent or car
wash soap using a sponge or
soft cloth. The sponge or cloth
should be frequently soaked in
the soap solution.
NOTE: Avoid spraying or allowing
water to flow over the following
places:
• Spark plug
• Fuel tank cap
• Fuel injection system
• Brake master cylinders
• Throttle cable boots
To Next Page
Loading...
Need help?
General
