Suzuki RM250K4 User Manual

31
CLUTCH CABLE
Check the clutch lever play at the clutch lever end
when the lever is lightly pulled in towards the grip.
Clutch lever play: 10–15 mm (0.4–0.6 in)
If adjustment is necessary, carry out the procedure
below.
1. Turn in the clutch lever adjuster
D.
2. Loosen the cable adjuster lock nut
A.
3. Turn the cable adjuster
B to obtain the correct
play.
4. Tighten the lock nut
A. Minor adjustments can
now be made with the clutch lever adjuster
D.
5. Place the rubber boot
C.
REAR BRAKE PEDAL
Check the rear brake pedal height.
Brake pedal height: 0–10 mm (0.0–0.4 in)
If the rear brake pedal height is not correct, adjust in
the following manner:
1. Loosen the lock nut
A.
2. Rotate the push rod
B to locate the pedal to the
correct height below the top face of the footrest
C.
Be sure to measure this height carefully.
3. Tighten the lock nut
A to the specified torque.
"
""
" Rear brake push rod lock nut
A
AA
A:
18 N·m (1.8 kgf-m)
FRONT SUSPENSION
Compression Damping Force Adjustment
Adjust the setting of the compression damping force
to the standard position. To adjust, turn the adjuster
screw
A clockwise until it stops, then turn it counter-
clockwise until 6 clicks are felt.
#
Do not force the adjuster screw
A
AA
A past the
stopped position or you may damage the
adjuster.
Be sure to adjust the damping force on both
front forks equally.

Suzuki RM250K4 Specifications

General

Brand	Suzuki
Model	RM250K4
Category	Motorcycle
Language	English