Suzuki RM250K4 User Manual

45
SAFETY CHECK OUT
!
ENGINE AND TRANSMISSION
CHASSIS
COLD TIRE INFLATION PRESSURE
ELECTRICALS
ROAD TEST INSPECTION
After completion of the setting-up the motor-
cycle all the following items should be dou-
ble-checked to confirm that the operation and
function of the motorcycle are satisfactory.
Now, setting-up the motorcycle and pre-deliv-
ery inspection have been completed and the
motorcycle can be passed to the customer.
ITEM MEASURE SPECIFICATIONS
Transmission oil Check/Fill
750 ml
(0.8/0.7 US/Imp qt)
Fuel tank Drain/Fill
8.0 L
(2.1/1.8 US/lmp gal)
Fuel/Oil premixture
ratio
Oil type 30:1
Throttle cable Check/Adjust
2.0–4.0 mm
(0.08–0.16 in)
Exhaust system Leakage
Fuel system
connection
Circlip/Leakage
Engine coolant Leakage/Level
1 100 ml
(1.2/1.0 US/Imp qt)
ITEM MEASURE SPECIFICATIONS
Disc brake (s) Clean/Fluid level
Brake lever Check/Adjust
11–15 mm
(0.43–0.59 in)
Brake pedal Check/Adjust
Height: 0–10 mm
(0–0.4 in)
Clutch cable Check/Adjust
10–15 mm
(0.4–0.6 in)
Drive chain Lubricate/Adjust
40–50 mm
(1.6–2.0 in)
Oiling points All necessary points
Wiring and cable Routing/Operation
Wiring connectors Clean/Tight
Front fork
Air pressure/
Operation
Rear shock absorber Operation
Tighten all nuts
and bolts
Torque those listed
in this manual
Cotter pins and
circlip
Fasteners, Check
FRONT REAR
70–110 kPa
0.7–1.1 kgf/cm
2
10–16 psi
70–110 kPa
0.7–1.1 kgf/cm
2
10–16 psi
ITEM CHECK FOR
Switch Operations
Operation
Engine stop switch
ITEM CHECK FOR
Engine
Starting/Acceleration/
Smoothness/Noise
Transmission Operation/Noise
Drive chain Operation/Noise
Clutch Operation/Noise
Brake Front/Rear, Operation/Noise
Steering Stability
Suspension Operation
Control cables Operation/Proper return
Leakage Fuel/Oil/Exhaust/Coolant

Suzuki RM250K4 Specifications

General

Brand	Suzuki
Model	RM250K4
Category	Motorcycle
Language	English