32
DSP DEPTH - The DSP (Digital Signal Processing) feature adds field effect to the
original voice. It simulates the effect of playing in a small room, a large room, or
a concert hall where the sound reverberates off the walls and ceiling. The level
of the effect can be adjusted in the range of 00, no effect, to 16, the maximum
level.
Please note, the DSP level does not effect the auto accompaniment.
1. Press the OVERALL button once, until the triangle in the display screen moves
to the DSP position. The current DSP level followed by “Depth” will appear on
the display screen.
2. Use the + button to increase the level or the – button to decrease the level. The
numeric pad can also be used to directly enter a value ranged from 00-16.
Press the +, – buttons simultaneously to recover the default setting of 08.
3. After three seconds the display screen will recover to the default voice screen.
FINE TUNING - The pitch of this piano is very accurate and stable, it is automatically
set to standard A440 pitch when the piano is turned on. The tuning feature
makes it possible to tune the pitch of the instrument in fine intervals. If neces-
sary, you can match the piano to another instrument or singer. Tuning can be
accomplished over + or – 16 semitone steps, or cents.
1. Press the OVERALL button twice, until the triangle in the display screen moves
to the TUNING position. The current tuning value followed by “Tune” will appear
on the display screen.
2. Use the + button to increase the level or the – button to decrease the level. The
numeric pad can also be used to directly enter a value ranged from 00-16.
Press the +, – buttons simultaneously to recover the default setting of 00.
3. After three seconds the display screen will recover to the default voice screen.
OVERALL CONTROLS
DSP i
TUNING i
GRADE i
VOLUME i
TALKING i
TRANSPOSE i
TOUCH i
SPLIT POINT i
METRO i
TEMPO 122
08: Depth
DSP i
TUNING i
GRADE i
VOLUME i
TALKING i
TRANSPOSE i
TOUCH i
SPLIT POINT i
METRO i
TEMPO 122
00: Tune