Suzuki Super Swift User Manual

2-93
BEFORE DRIVING
52RM0-01E
Information switch
(if equipped)
You can use the information switch to
switch the display indication when the igni-
tion switch is in “ON” position or the igni-
tion mode is “ON” and the vehicle is
stationary.
52R31310
(1) Information switch
(2) Indicator selector knob
To switch to the setting mode
1) Push and hold the information switch
(1) when the vehicle is stationary.
2) After the display of setting mode is
shown, select the setting item that you
want to change by turning the indicator
selector knob (2) left or right. Refer to
“Setting mode” in this section for
details.
NOTE:
If you switch to the setting mode while
either of the following items is shown on
the information display, the current value
will be reset. If you do not want to reset its
value, push the indicator selector knob (2)
quickly beforehand and switch to the other
item.
• Average fuel consumption
• Driving time
• Total idling stop time
• Total idling fuel saved
To exit the setting mode
1) Push the indicator selector knob (2)
and select “Back”.
2) Push the information switch (1) quickly.
NOTE:
You can exit the setting mode by either of
the following operations:
• Turn the ignition switch to “ACC” or
“LOCK” position.
• Press the engine switch to change the
ignition mode to “ACC” or “LOCK”
(OFF).
• Start driving your vehicle.
(1) (2)
EXAMPLE

Suzuki Super Swift Specifications

General

Brand	Suzuki
Model	Super Swift
Category	Automobile
Language	English