2-94
BEFORE DRIVING
52RM0-01E
Information display
The information display is shown when the
ignition switch is in “ON” position or the
ignition mode is “ON”.
52RM20680
(1) Information display
52RM20580
(2) Trip meter selector knob
(3) Indicator selector knob
The information display shows the follow-
ing information.
Display (A)
Clock
Display (B)
Thermometer (if equipped) / “ENG A-
STOP” indicator (if equipped) / “ENG A-
STOP OFF” indicator (if equipped)
Display (C)
Warning and indicator messages /
Fuel consumption / Driving range /
Average speed / Driving time /
Clock and date / Motion /
Torque and power / Accelerator and brake /
Energy flow (if equipped)
Display (D)
Selector position (for automatic transaxle
or CVT vehicles) / Gearshift indicator
(if equipped)
Display (E)
Trip meter
Display (F)
Odometer
52RM21040
When the ignition switch is turned to “ON”
position or the engine switch is pressed to
change the ignition mode to “ON”, the
clock display shown in the above illustra-
tion will appear on the display for several
seconds.
Some warning and indicator messages
may appear on the display when the igni-
tion switch is turned to “ACC” or “LOCK”
position or the ignition mode is “ACC” or
“LOCK” (OFF).
(A)
(E)
(D)
(C)
(B)
(F)
(1)