Sym Jet 50 User Manual

7. “V” TYPE BELT DRIVE SYSTEM/KICK-STARTER
7-6
Install the driven pulley that has installed the belt
onto drive shaft.
Install the clutch with universal holder, and then
tighten nut to specified torque value.
Torque value: 3.8 kgf-m
Movable Drive Face
Removal
Remove left crankcase cover.
Hold generator flywheel with universal holder,
and then remove drive face nut.
Remove drive face.
Drive belt
Clutch outer
Drive shaft
Flywheel
Nut
Clutch/driven pulley
Drive face
Nut
Universal holder
Universal holder
Drive face
This chapter Contents

Sym Jet 50 Specifications

General

Brand	Sym
Model	Jet 50
Category	Scooter
Language	English