3
Please WRITE your Serial Number & Oset Infor-
maon here. This can be found on the 2nd & 3rd
Menu Levels of the Display Controller. Have this
available BEFORE calling for service or technical
support.
S/N: ________________________________
The osets for this machine are:
BG1: _____°F / BG2:_____°F / BG3:_____°F
Steam Tank:_____°F
Factory Contract Informaon:
Synesso Inc.
5610 4th Ave South
Seale, WA 98108 - USA
Tel: +1.206.764.0600 / Fax: +1.206.764.0601
E-mail: info@Synesso.com
Web: www.Synesso.com
Twier: @SynessoFactory
Instagram: Synessofactory
INTRODUCTION
Congratulaons on the purchase of your Synesso espresso machine. Please read this Technical Manual and
retain it in a safe locaon for future reference. If you have any quesons about your machine, please con-
tact Synesso and our knowledgeable sta will assist you
Included in the package with this machine you will nd the following:
• Thumb Drive containing the Owner’s Manual and other technical documents
• Pump/Motor Combinaon + hoses (3/8” compression ngs on all hoses)
• 8’ Long metal reinforced ¾” ID drain hose + hose clamp (aached)
• Fing, 1/4” male NPT x 90° x 3/8” Compression (if not CE)
• Accessory Package: Portalters (per customer specicaon), blind basket, Synesso 3 oz. (90ml) shot
glass, 4oz jar cleaning detergent, and a 58.4mm tamper.
• Electrical plugs are ONLY included on CSA Cered machines (Canada). For all other machines, the
owner of the machine must purchase an appropriate plug end for their machine. Please see the
installaon instrucons starng on page 11 for more informaon.
Serial Number
Your espresso machine has a unique serial number, this
number can be found on the serial number label located on
the back side of the handheld display controller. The number
can also be read on the display during start-up. Please have
this serial number available for reference when contacng
the factory.
This manual applies to Synesso models S200 and S300. “S Series” machines are fully volumetric with up to
6 programmable dispensed volumes, depending on sengs. The S series machines have an external pump
and motor.