6
RECOMMENDED TOOLS & SUPPLIES
• Mul Meter – reads volts, amps and ohms
(The Fluke T5-600 is recommended)
• Heat Shrink Gun or Torch
• Vacuum with a Hose
• Compressed Air
• Descaler – Citric Acid
• Flashlight
• Box Knife
• Thread Sealant – Red and Blue Locte
• Food Grade Grease (Super Lube) 1.8600
• Tube Bender for 1/4”, 5/16”, and 3/8” Tube
• Flare Tool - 45°
• Tube Cuer
• Brass Bristle Wire Brush
• 3/8” Drive Socket Wrench with 7/16”, 1/2” and
9/16” “Deep Sockets”
• Hammer Medium Size Ball Peen
• Wire Stripper / Crimper
• Small Punch and Chisel
• 3/8” ID rubber tube for draining
• Small Files – Round and Triangular
• Picks – Straight and Curved, an Ice Pick is great for
replacing portalter gaskets
• Dies: 1/8” NPT, 1/4” NPT, and 1/8” BSPP
• Taps: 8-32, 10 - 32, 3/8 – 16, and M6 x 1
booming Tap
• Allen Wrenches: 3/32”, 1/8”, 9/64”, 5/32, 3/16”,
1/4” (steam valve seat)
• Wrenches: 2x11/32, 1/4, 5/16, 3/8, 2x7/16, 1/2,
2x9/16 , 5/8, 11/16, 3/4, 12mm & 17mm
• Adjustable wrenches: Medium size 1 1/4”
opening and Small for ght spots
• Pliers: Channel Lock, Standard pliers and Side
Cuers
• Philips Head Screwdrivers: #2 short, #2 long and
#1
• Flat Head Screwdrivers: #2 short, #2 medium
length, #1 medium, #0 medium
• A large at head screwdriver (or small at nail
puller) to use as a pry bar or wedge.
• Pen and paper
• Hand cleaner and Towels
Tools and recommended items required to fully diagnose, service and maintain
Synesso espresso machines.
START UP SCREEN
The serial number contains important informaon:
2—is the number of brew groups on this machine
03—is the month the machine was built
18—is the last 2 digits of the year it was built
4277—is the machine sequence number
When power is turned on, this
screen is shown, displaying the
soware version and serial
number.
To Next Page
Loading...
Need help?
General
