To Next Page

To Previous Page

PROGRAMMING

Overview

S Series machines have a handheld (wired) controller, pictured below, to allow the user to comfortably view

and change the machine sengs.

To change sengs on these screens, rst press the line buon on the le side of the display associated

with the seng you wish to change. The value will ash once selected. Press the up or down buons unl

the desired value is displayed. Press the line buon again to conrm the change. The value will stop ash-

ing. Use this procedure to change any variables in the controller menus.

The top line of every screen indicates the tle. In this case, Temperature Overview.

You can return to this screen at any me by pressing the home buon at the top right of the controller.

The machine will also return to this screen automacally aer a short me.

Lines 2, 3, and 4 may contain informaon or sengs, many of which can be changed by the operator. This

screen provides the current temperatures for each brew group along with the steam tank. The most recent

error will also be shown in the lower right corner. No sengs can be changed on this screen.

In some circumstances, numeric temperatures will not be shown. If a tank is reading ‘LOW’, this indicates

that the tank is below the temperature probe’s eecve range of measurement (170°F-270°F / 76.6°C-132.2°

C). Readings above the eecve range will show as ‘HIGH’.

The programmable temperature range for a brew group is from 180°F (82.2°C) up to 220°F (104.4°C). The

factory set temperature is 203°F (95°C). To change brew group set temperatures, refer to page 19.

The steam tank is set in factory to a default seng of 250°F (121.1°C). To change this temperature seng,

see page 20.

The [OK] on the right hand side of line 4 is indicang that there have been no errors detected by the control

system. If, in place of the [OK] you nd an error code (Ex: STLW01), refer to the Error Log codes on page 22.

To cycle to the next display screen, press the down arrow buon. (You may press the up arrow instead to

travel back to the previous screen.)

Line 2 Buon

Line 3 Buon

Line 4 Buon

Home

Down

Line 1 Title

Menu Level 1: Temperature Overview; Home Screen

Synesso S300 User Manual

Questions and Answers: