4
Doument in original language
GB
EU Declaration of conformity
Manufacturer
Systemair Sverige AB
Industrivägen 3
SE-739 30 Skinnskatteberg, Sweden
Switchboard: +46 (0) 222 440 00 Fax: +46 (0) 222 440 99
www.systemair.com
The manufacturer hereby declares that the following products:
Duct fan with a circular connection: Duct fan with a rectangular connection: Radial fans:
Ex 180 - 4, - 4C
Ex 140 - 2, - 2C, - 4, - 4C
(SP03ATEX3101x)
KTEX 50-25-4 SP12ATEX3164X DKEX 225-4 SP12ATEX3165X
KTEX 50-30-4 SP12ATEX3164X DKEX 250-4 SP12ATEX3165X
KTEX 60-30-4 SP12ATEX3164X DKEX 280-4 SP12ATEX3165X
KTEX 60-35-4 SP12ATEX3164X DKEX 315-4 SP12ATEX3165X
KTEX 70-40-6 SP12ATEX3164X DKEX 355-6 SP12ATEX3165X
SP = Technical Research Institute of Sweden (National Testing), SE- 501 15 Borås
(The declaration applies only to a product in the condition that it was delivered in and that was installed in the
facility in accordance with the included installation instructions. The insurance does not cover components that
are added or actions carried out subsequently on the product).
Comply with all applicable requirements in the following directives:
ATEX directive 2014/34/EC EMC directive 2014/30/EC
Machinery directive 2006/42/EC
The following harmonized standards are applied in applicable parts:
EN 60 079-0:2009 Explosive atmospheres – Part 0: Equipment - General requirements.
EN 14986:2007 Explosive atmospheres– Design of fans working in potentially explosive atmospheres.
EN 60 079-7:2007 Electrical apparatus for explosive atmospheres. – Part 7: Equipment protection by increased
safety "e".
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction.
EN 13857 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and
lower limbs.
EN 61000-6-2 Electromagnetic compatibility (EMC) – part 6-2: Generic standards - Immunity for industrial
environments.
EN 61000-6-3 Electromagnetic compatibility (EMC) – part 6-3: Generic standards - emission standard for
residential, commercial and light-industrial environments.
Skinnskattberg 16-05-2016
Mats Sándor
Technical Director