Important safety information
14.3 Safety notes
Planners, plant builders and operators are responsible for the proper assembly and intended use.
• Only use the Multibox in a awless condition.
• Provide generally prescribed electrical and mechanical protective devices.
• During assembly, commissioning, maintenance and controls, secure the place of assembly and the premises for any preparations
against unauthorised access.
• Obey the industrial safety directives.
• Safety components may not be circumvented or put out of function.
• Keep all the warning signs on the Multibox complete and in a legible condition.
• Regularly instruct the personnel about safety-conscious conduct.
NOTE
We have carried out a risk assessment for the Multiboxes. However, it can only apply to the Multibox itself. After
installation of the Multibox, we recommend carrying out a risk assessment of the total sys-tem. In this way, you have
the guarantee that there is no risk potential from the system.
14.4 Personnel
14.4.1 Assembly personnel
• Assembly may only be carried out by trained, qualied personnel.
14.4.2 Work on the electrical equipment
• Work on the electrical equipment of the ventilator may only be done by a trained electrician or a person given instruction in electri-
cal engineering. This person must know the relevant safety directives in order to recognise or to avoid possible risks.
14.4.3 Personnel for operation, use, maintenance and cleaning
• Operation, use, maintenance and cleaning may only be done by trained personnel with the authorisation to do so. The operating
personnel must possess knowledge of how to use the Multibox. In the event of a disturbance or an emergency, they must be able to
react correctly and suitably.
14.5 Intended use
The Multiboxes (MUB) are intended for installation in ventilation systems. They can be installed both in channel systems and also with
free suction via an admission nozzle and a suction-side contact protec-tion grid. Free blow-out via a contact protection grid is also pos-
sible following prior consideration dur-ing design.
• The Multiboxes are suitable for the conveying of clean air, air with a low dust and grease content, media up to a max. air density of
1.3 kg/m3 and an admissible moisture of max. 95%.
• The maximum admissible operating data on the name plate apply for an air density p = 1.2 kg/m3 (sea level) and a maximum air
moisture of 80%.
• The multiboxes are suited for the following range of ambient and conveyed goods temperatures:
– MUB from -20 °C to +50 °C
– MUB (UL) from -30 °C to +50 °C
– MUB/F from -20 °C to +55 °C, 400° C/120 min
– MUB/T from -20 °C to +100 °C
– MUB-EC from -20 °C to +60 °C
30
General information
Multibox MUB - V 1.0
To Next Page
Loading...
Need help?
General