Operating in conventional mode 47
Receiving calls
When a call is received with valid signaling, the radio
unmutes and you can hear the call.
Identifying the talking party
Your radio may be programmed to display the name
or radio ID of the talking party.
If the name of the talking
party is in the call list, the
radio will display the name of
the talking party. If this name
is not in the call list, only the
radio ID is shown.
Talkgroup calls will first
display the name of the
talkgroup. While a party is
talking, the radio will also
display the name or radio ID
of the talking party.
Turning caller ID on and off
Your radio may be programmed to allow you to turn
the talking party ID on and off.
1 Press Menu and select Radio settings > Display
settings > Talk party ID.
2 Scroll to either On (or Off) and press Select.
(The current setting is highlighted.)
The message Talking party ID activated
(or deactivated) appears in the display.
Call received
Car 2
Menu
Car 2
Talkgroup01
Menu
To Next Page
Loading...
Need help?
General
