42 Operating in conventional mode
Receiving calls
When a call is received with valid signaling, the radio
unmutes and you can hear the call.
Identifying a caller (talking party ID)
Note: This feature is available for digital channels only.
You can use talking party ID to identify the radio user
calling you. (This feature is usually turned on when the
radio is programmed.)
■ talkgroup call: the name of
the talkgroup is displayed.
■ individual call: the name of
the radio name from your
call list is displayed (if there
is no associated name,
only the radio unit ID
is shown).
Turning talking party ID off and on
1 Press Menu and select Radio settings > Display
settings
> Talk party ID.
2 Scroll to either On (or Off) and press Select.
(The
current setting is highlighted).
The message Talking party ID activated
(or
deactivated) appears in the display.
Car 2
Talkgroup01
Menu
Call received
Car 2
Menu
Talking party
ID activated
To Next Page
Loading...
Need help?
General
