68 Operating in P25 trunking mode
Unconnected calls
If your call is not connected, the way your radio behaves
is explained in the following table.
Radio behavior Explanation
The system is too busy to process
your talkgroup or individual call.
The radio sounds three
short beeps.
The system is now available to
process your talkgroup or
individual
call.
The radio sounds five
beeps, followed by a
repeating double beep.
You have selected a talkgroup that
does not currently exist on the
system. Your display shows that you
have lost service and
no longer
appears.
See “Service is lost” on page 59.
The radio sounds two
short beeps.
You have attempted to make an
individual call to a radio that does
not currently exist on the system.
You have attempted to make an
individual or phone call, but you are
not authorized to do this.
The radio sounds two
short beeps.
Your individual or phone call has
been rejected or is unanswered.
System
queued
Busy channel
now free
Talkgroup 1
No service
Menu
No answer
No answer
To Next Page
Loading...
Need help?
General
