Taylor C712 Operator Training

C712 Operator Training -21-
Troubleshooting
Hopper
The mix in the hopper is too cold.
Cause: The hopper temperature is out of adjustment.
Remedy: Call an authorized service technician.
The mix in the hopper is too warm.
Cause: Hopper cover is not in position.
Remedy: Clean and sanitize hopper cover and place in position.
Cause: The hopper temperature is out of adjustment.
Remedy: Call an authorized service technician.
Mix Low and Mix Out probes are not functioning.
Cause: Milkstone build-up in the hopper.
Remedy: Clean hoppers thoroughly.
LCD
No control panel functions with power switch ON.
Cause: Machine is unplugged.
Remedy: Plug into wall receptacle.
Cause: Circuit breaker is OFF or blown fuse.
Remedy: Turn the circuit breaker ON or replace the fuse.
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________

Taylor C712 Specifications

General

Brand	Taylor
Model	C712
Category	Freezer
Language	English