TC-Helicon VoiceLive User Manual

18
Pressing the STORE key on VoiceLive allows storing the current Preset or Song, or IO and Util
Global System Parameters.
Above is an example of the store screen after editing a preset and pressing store. VoiceLive keeps
track of the last thing you changed. Pressing the STORE button again will store the preset to the
current location. For example, if the last thing you changed was a Global parameter under the IO
and UTIL edit screens, the LCD display would show:
<IO/Util>
At this point the EDIT knobs and data wheel do the following:
DATA WHEEL: Selects whether to store current Preset, Song or IO/Util
parameters.
When Preset or Song are selected by the DATA WHEEL:
EDIT 1 knob: Select character of preset/song name to edit
EDIT 2 knob: Change selected character.
EDIT 4 knob: Change Store destination.
Pressing store again will execute the store operation. To abort the store operation press the EDIT
key. Storing after a quick edit is as simple as pressing the STORE button twice.
Input Clip
0 PPM dB
-5
-10
Out Clip
-20
-40
HARMONY
THICKEN
EFFECTS
PITCH CORR.
I/O
UTILITIES
MIDI IN
PROGRAM DISPLAY
HARMONY | CORRECTION | EFFECTS
VOICELIVE
VOICE 2
VOICE 4
VOICE 1
VOICE 3
LIMITMIC INGLOBAL FX EDITED
PRESET# HARMONY MODE ROOT SCALE/CHORD
<Preset> To:23
Stor
Go Your Own
STORE OPERATION

TC-Helicon VoiceLive Specifications

Analog Inputs

mic impedance	3.6/1.8 kOhm
line impedance	21/13 kOhm
line input level at 0 dBFS	24 dBu to 0 dBu

Analog Outputs

output impedance	40 Ohm
max output level balanced	20 dBu
max output level unbalanced	14 dBu

Operating Environment

operating temperature	32° F to 122° F (0° C to 50° C)
storage temperature	-22° F to 167° F (-30° C to 70° C)
humidity	Max. 90 % non-condensing

Supplementary

dimensions	11.1" x 10.25" x 3.5" (282 x 260 x 89 mm)
weight	5.9 lb. (2.7 kg)
mains voltage	100 to 240 VAC, 50 to 60 Hz (auto-select)