TC-Helicon VoiceWorks User Manual

16
VOICES & EFFECTS EDIT PARAMETERS
EFFECTS Tap tempo KEY
This key allows the enabling/disabling/editing
of the effect parameters and can be used to
tap the tempo of the delay time.
A single click will turn on/off the Reverb/Delay
effects. Double clicking gives access to
parameters related to the Reverb and Delay
effects. Once in this edit menu, double
clicking will advance to the next logical group
of parameters. Pressing ARROW KEYS will
move to the next or previous parameter, and
holding down arrows will quickly scroll through
the parameters.
FX LEVEL
Sets the overall volume of the combined
Reverb and Delay effects.
R
EV/DLY
Reverb/Delay mix.
L
E-REV SND
Lead to Reverb effects send.
H
A-REV SND
Harmony to Reverb effects send.
AU-REV
SND
Auxiliary to Reverb effects send.
L
E-DLY S
ND
Lead to Delay effects send.
H
A-DLY
SND
Harmony to Delay effects send.
AU-DLY SND
Auxiliary to Delay effects send.
DLY2REV SND
Delay output to Reverb effects send.
Effects Block Diagram
LEV
Sets the volume level of the lead voice
thickening effect.
D
ET
Sets the amount of lead voice detuning.
S
PRD
Sets the amount that the detuned voices are
panned. A value of 100%
results in the
detuned voices being hard panned R and L.
A value of 0%
results in the detuned voices
panned to center.

TC-Helicon VoiceWorks Specifications

Analog Inputs

impedance balanced	3.6 kOhm
impedance unbalanced	1.8 kOhm
line input level at 0 dBFS	24 dBu to 0 dBu
line sensitivity at 12 dB headroom	-12 dBu to 12 dBu
mic input level at 0 dBFS pad off/on	-14 dBu/6 dBu to -51 dBu/-31 dBu
mic sensitivity at 12 dB headroom pad off/on	-26 dBu/-6 dBu to -63 dBu/-43 dBu

Analog Outputs

output impedance	40 Ohm
max output level balanced	20 dBu
max output level unbalanced	14 dBu
output range	Variable up to +20 dBu

Environment

operating temperature	32° F to 122° F (0° C to 50° C)
storage temperature	-22° F to 167° F (-30° C to 70° C)
humidity	Max. 90 % non-condensing

Power

mains voltage	100 to 240 VAC, 50 to 60 Hz (auto-select)
power consumption	<15 W
frequency response DIO	DC to 22/23.9 kHz ± 0.01 dB @ 44.1/48 kHz

Physical Characteristics

dimensions	19" x 1.75" x 8.2" (483 x 44 x 195 mm)
weight	4.1 lb. (1.85 kg)
display	16x 2 character LCD display