7 8
Step 3. Place the SIM card and/or microSD
TM
card into the tray, then
slide the tray into the slot. It only fits one direction. Do not force into
place. Keep the SIM tool in a safe place for future use.
NOTE: A Verizon SIM card is already installed in your phone. This
diagram shows SIM card location if you choose to remove or
replace it.
2. Charge the phone
Before turning on your phone, charge it fully.
Insert the small end of the USB cable into the phone.
Insert the larger end into the charger and plug it into an outlet.
WARNING: Only use approved chargers with your device.
Incompatible chargers or tampering with the charger port could
damage your device and void the warranty.
3. Turn your phone on/o
To turn your phone on, press and hold the Power/Lock button until
the screen turns on.
NOTE: The first time you turn on your phone, you will need to activate
it.
See the Welcome Guide included with your phone. After you turn on
the phone, follow the on screen instructions to set up your device.
To turn your phone o, press and hold the Power/Lock Key, and tap
Power O on the screen when it appears.
Locking/unlocking the screen
To turn on your screen, press the Power/Lock button. Then swipe
up on the screen to unlock it.
To turn o your screen and prevent accidental key presses, press
the Power/Lock button.
To Next Page
Loading...
Need help?
General
