Channel Skip
You can hide channels in the Channel List. Then, when you
press the CH+ or CH- button, the TV will skip the hidden
channels. You can still tune to these hidden channels
by pressing the number of the channel on the numeric
keypad.
To hide specic channels:
1. In the Setup Menu, press the up or down arrow ( ) to
highlight Channel Skip.
2. Press the left or right arrow ( ) to open the Channel
List screen.
3. Press the up or down arrow ( ) to highlight the
channel you wish to skip; then press the OK button to
check the highlighted channel. You can add the
channel back into the Channel List by highlighting it and
un-checking it.
4. Repeat the process to hide additional channels.
5. Press the MENU button to return to the previous menu,
or press the CLEAR button to close the menu.
Channel Edit
The Channel Edit function allows you to add or change
a channel label, only for analog channels. You cannot
change the name on digital channels.
To edit an analog channel name:
1. In the Setup Menu, press the up or down arrow ( ) to
highlight Channel Edit.
2. Press the left or right arrow ( ) to open the Channel
List screen.
3. Press the up or down arrow ( ) to highlight the
channel you wish to label or edit.
4. Press the OK button to enter the Channel Edit screen.
5. The Channel name will be highlighted. Use the numeric
keypad to enter the name for the channel.
6. Press the OK button to conrm and save the new label.
7. Press the MENU button to return to the previous menu,
or press the CLEAR button to close the menu.
To Next Page
Loading...
Need help?
General
