w w w . t e c h n i c o l o r . c o m / m c s
16.9 Check / Update the ATSC-8 firmware version
Note: COM46 software must be set to version 3.2.19 or newer.
Internal to the ATSC-8 are 4 tuner modules. To properly interact with the with the COM2000
interface the firmware should always be set to version 20120405. The firmware and the
HDHomeRun software utility required to update the firmware are available on the Technicolor
After Market Support web site, or through your distributor. Install the utility and save the
firmware to a folder on your PC.
16.10 HDHomeRun Tech Configuration Utility
Upon opening the HDHomeRun software will search for, and discover the active devices. They are
listed by MAC address in the Device View tab.
Figure 90 - HDHomeRun Tech Configuration Utility
From the Tools menu select Upgrade Firmware.
Click the Select button and navigate to the location of the HDHomeRun firmware.
Figure 91 - HDHomeRun Upgrade Firmware Tab
To Next Page
Loading...
Need help?
General