RDS broadcasts
25
RQT5861
Radio functions
EON tuning
EON puts the unit on standby to receive programs that are going to
be broadcast on a station that shares RDS signals with the current
station. Preset FM stations before proceeding. EON tuning does not
work if the unit is not receiving EON signals (“NO EON” is
displayed.)
1 Press [RDS].
2 While “RDS” is flashing
Press [TUNING, 2, 1, PTY
SELECTOR] to select the program
type.
3 While the PTY display is flashing
Press [FM MODE, EON].
“EON” lights.
The current station remains tuned in until the program type
starts, then the unit switches to the station and “OTHER
PROGRAM SERVICE” scrolls across the display. (It changes
immediately if the selected program is broadcasting.)
To cancel EON tuning
1. Press [RDS].
2. Press [FM MODE, EON].
EON tuning is also canceled if you operate the tuner, change the
input source, or turn the unit off.
PTY displays
A
1
2
To Next Page
Loading...
Need help?
General
