Technics SA-GX910 User Manual

Remote-Control Operation (Video) ............... 53
Watching TV broadcasts ...
Watching video tapes......
To stop playback temporarily .
To
stop
playback
is
To fast-forward or rewind the video tape
To
activate
the
surround
effect
To
adjust
the
rear
volume
level
Recording
of
TV
broadcasts.
.
To
stop
recording
temporarily.
To
stop
recording........
Recording
of
video
discs.
To
stop
recording
temporarily.
To
stop
recording........
Watching
video
discs
....
To
watch
from
the
desired
chapter
number
To
stop
playback
temporarily
To stop playback
Program play
To
clear
a
program
entry
To
clear
the
entire
program
.
Skip play.
Before Use
Be sure to disconnect the mains cord before adjusting the voltage
selector.
Use a minus (—) screwdriver to set the voltage selector (on the
rear panel) to the voltage setting for the area in which the unit will
be used,
Precautions
Before using this unit please read these operating instructions
carefully. Take special care to follow the warnings indicated on the
unit itself as well as the safety suggestions listed below.
Afterwards keep them handy for future reference.
Safety
1. Power Source -- The unit should be connected to power supply
only of the type described in the operating instructions or as
marked on the unit.
Polarization -- If the unit is equipped with a polarized AC power
plug (a piug having one blade wider than the other), that plug will
fit into the AC outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try reversing the
plug. ff the plug should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the safety purpose of
the polarized plug.
2.
Remote-Contro!} Operation (Other unit control)... . 61
Watching TV broadcasts
To control an RCA VCR or TV
To return to Panasonic codes.
To control a Zenith VCR or TV
To return to Panasonic codes
Remote-Control Operation (Other functions)... 64
To enjoy “Direct Play” 6.00.00... 2 eee
To enjoy “Multi-Function Play”
To program the multi-function keys
To stop programming
To alter the program
Suggested uses for programming .
To operate
Code memorization
About keys which have memory function. . 68
To memorize codes...............- . 69
Code erasure ... es . 70
To cancel one code at a time. . 70
To cancel by block.
Technical Specifications ..
Troubleshooting Guide
Product Service
Product Information. .
(If the power supply in your area is 117 V or 120 V, set to the “127
V" position.)
Note that this unit will be seriously damaged if this setting is not
made correctly.
3. Power Cord Protection -- AC power supply cords should be
routed so that they are not likely to be waiked on or pinched by
items placed upon or against them. Never take hold of the plug or
cord if your hand is wet, and always grasp the plug body when
connecting or disconnecting it.
4. Nonuse Periods -- When the unit is not used, turn the power off.
When left unused for a long period of time, the unit should be
unplugged from the household AC outlet.

Technics SA-GX910 Specifications

General

Brand	Technics
Model	SA-GX910
Category	Stereo Receiver
Language	English