Technics SC-EH600 User Manual

Enjoying sound with DOLBY PRO LOGIC
Foe SC-EH600
Enjoying SURROUND or 3 STEREO
Before trying anything, have you set the center mode and adjusted
speaker output level?
When viewing a video, turn on the power supply for the TV and set
the TV to video mode.
[I Press INPUT SELECTOR to select the desired
external source.
Each time you press this button, sound sources will be switched
as follows.
TUNER-»CD-»TAPE
t 1
PHONO <—VDP<-VCR<—EXT
These indications correspond to terminals on the rear panel of
the sound processor or tuner/amplifier. Switch the displayed
indication to the source you want to use.
0 Press DOLBY PRO LOGIC OFF/ON to select
ON.
El Press MODE to select “SURROUND” or
“3 STEREO”.
FI Start the desired source.
To operate external sources, refer to the operating instructions
provided with the specific unit.
PETE1
When using SURROUND, use software recorded in Dolby Surround.
To turn off the DOLBY PRO LOGIC systems:
Press DOLBY PRO LOGIC OFF/ON to select "OFF".
You cannot record acoustical effects produced in tire SURROUND
and 3 STEREO modes.
Sound
field/tone
quality
operations/other
functions

Technics SC-EH600 Specifications

General

Brand	Technics
Model	SC-EH600
Category	Stereo System
Language	English