Technics SD-5948 User Manual

Listening a)
sesocossesyaannonnonvotte bototssosasoveonaonnonronnvonvttto eaeeesrecereor
SPEAKERS - On the amplifier’s display
Elapsed play time
Track number in play
eeeeseraserserensanennet COSHH RE ERTS RESET SHEESH OT EUS EE eS Seoeeenessserseee
Va vn
MIN MAX
Listening to compact discs
Sequential play
The changer plays all the tracks on all the discs in order and stops
automatically when the last track on the last disc finishes playing.
Before starting, load your discs.
Press POWER of the amplifier and CD changer.
First switch on the power of the amplifier.
The units will switch on.
Momentarily, the message “CHECKING DISCS” will appear
on the display.
When it goes out, the last disc played will be displayed
At power ON, if the “TAPE MONITOR” indicator
flashes on the amplifier display
Press TAPE MONITOR and check the indicator goes out.
Press SPEAKERS to turn on the speaker systems.
Press CD.
Press P.
Play will begin.
The disc number is the same as the slot number.
Turn VOLUME to adjust the volume level.
BOSH RETA SECS RESA NHR ESEEEO RSS FES HTS PROPOSES AEH HAO RE OTETOSEESS eeeeerereeesrenseon
To stop play
Press W.
The display will show the total number of tracks and the total
playing time of the current disc. (See page 21.)
It takes roughly 3 seconds from the time you press I until the disc
is returned to the slot.
Press > to re-start play.
To temporarily stop play
Press II.
The “98” indication will lights up.
Press > to resume play.

Technics SD-5948 Specifications

General

Brand	Technics
Model	SD-5948
Category	Stereo System
Language	English