Technics SD-5948 User Manual

|
Troubleshooting
guide
|
|
Reference pages indicated in black circles. (For example: @)
Probable cause(s Suggested remedy
While using the cassette deck
Tape
moves
but
no
sound
The
input
selector
of
the
amplifier
is
not
set
to
the
|
e
Set
to
the
“TAPE
MONITOR?”
position.
@
is heard. “TAPE MONITOR” position.
Previously
recorded
sound
|
Erase
head
is
dirty.
ə
Clean
the
head.
@
has not been erased.
Sound output is hoarse or Heads are dirty. e Clean the heads. @
unsteady. Tape is damaged. è Try operation with a new tape; if there is no problem
with the new tape, discard the damaged tape.
The Dolby noise-reduction function is off. è Press DOLBY NR button €
Poor sound quality
(especially in the high treble
and low bass ranges).
Sound is low, poor tone, Heads, capstan and/or pinch roller are dirty. eè Clean the heads, capstan and/or pinch roller. @
intermittent sound, nolse. Tape is damaged. e Try operation with a new tape.
There is a lot of noise, and The heads have been magnetized. è Demagnetize the heads with a commercially sold
the
treble
is
drowned
out.
magnetic
eraser.
i
Recording is not possible. One of the tape-to-tape recording-speed indicators Switch off whichever tape-to-tape recording-speed
is illuminated. indicator that is illuminated (by pressing the
SPEED button). @
Recorded sound is TV This unit is placed near a TV. ə Try placing this unit farther away froma TV.
noise.
While using the digital sound processor or the graphic equalizer
Equalized sound can’t be e Switch “ON” the power.
heard.
While using the remote control transmitter
Remote control transmitter Batteries are incorrectly installed. e Insert the batteries so that the positive (+) and
does not function. negative (-) polarities are correct. @
The remote control transmitter batteries are è Replace them with new batteries.
drained.
There is an obstruction between the remote control | è Remove the obstruction.
transmitter and the system components.
The remote control transmitter is not correctly e Face the remote control transmitter correctly
facing the system components. toward the system components. @
: When getting service _
Product
service
Before
bringing
in
your
changer
for
service,
be
sure
to
remove
all
Do not attempt to remove the cover(s) or repair the unit discs first. ;
yourself.
If
the
disc
in
play
doesn’t
return
to
its
slot
when
you
press
W,
hold
Refer
servicing
to
qualified
personnel
only.
the
button
down
for
about
4
seconds.
The
disc
should
return
to
the
slot.
Product information
For product service, product information or assistance in
product operation, refer to the servicenter directory.

Technics SD-5948 Specifications

General

Brand	Technics
Model	SD-5948
Category	Stereo System
Language	English