Technics SD-5948 User Manual

Listening ae
[DIRECT }
re
CO
PROGRAM }
Listening to compact discs
Direct programming á
If, while listening to a certain track, you decide that you want to
add that track to your program, you can with direct programming.
[While the track you want to program is playing]
Press DIRECT.
The current track will be added to the tail end of the program.
When you make a program as explained under “Program play”,
and then perform the above procedure without clearing the
program first, the selected track is added to the end of the program.
e You cannot add to the program if already full, that is, if already 32
selections have been programmed. If you press DIRECT in such
case, the message “PGM FULL” will be displayed. Therefore,
direct programming is possible only when 31 or less tracks have
been programmed.
e During program play, the DIRECT button does not respond to
touch.
To listen to programmed tracks Fj
[In the stop mode]
Press PROGRAM and check “PROGRAM” appears on
the display, then press P.
The program will start from the first track.
soesovesneonnonnonvonnors SheeseeeseoeeaeseenseeenseoneooenTonE eevee reeeereeerensnnegan
To clear all programmed contents.
[In the stop mode]
Press $.
Search function
You can search rapidly forward or backward on the disc for specific
sections,
[In the play or pause mode]
Press and hold 44 or PP.
“44: You can search backward.
>>: You can search forward.
Release the button when you reach the desired point.
The changer will return to the previous mode (play or pause).
In the sequential/disc grouping play mode
When the changer finishes searching the current disc, it starts
searching the next one.
In the single disc play mode
You can search forward or backward only within the current disc.
In the program play mode
You can search forward or backward only within the current track.

Technics SD-5948 Specifications

General

Brand	Technics
Model	SD-5948
Category	Stereo System
Language	English