SD-Audio Play
Play back audio data on the SD card saved by a PC, etc.
1. Insert the SD card with the stored data to be
played into the SD slot. (See page 138.)
• Close the lid securely after inserting the card.
2. Press the SD button to turn it on.
3. On the SD MENU display, select SD-AUDIO
PLAY.
• The display looks similar to the following.
• Using the PLAY MODE button, you can select
the type of playback.
NORMAL:
For playing back the songs in sequential order.
ALL REPEAT:
For playing back all the songs repetitively.
1 SONG REPEAT:
For playing back a song repetitively.
• You can select PLAY LIST using the PLAYL-
IST SELECT button as necessary.
• If you press the SD-SOUND PLAY button, the
display changes to the PLAYBACK display for
SMF data stored on the card.
4. Press the buttons next to the SD slot to play
back the data.
• Adjust the volume for playback using the SD
VOLUME ∧ and ∨ buttons. The volume setting
will be kept for about one week after the power
is turned off.
• You can also use the buttons below the display
to adjust these settings.
SD
LOAD
Volume
Skip to the previous, Rewind
(hold the button)
Skip to the next, Fast forward
(hold the button)
Stop
Playback/
Pause
• Press the PLAY button immediately after
inserting the SD card to enter the playback
mode directly.
• When the SD card contains both SD-AUDIO
and SD-SOUND data, select the priority of
them beforehand. (Refer to page 152.)
• The playback operation is possible even
when the control panel unit is closed.
SD card
Part VII SD card
143
QQTG0671
To Next Page
Loading...
Need help?
General
