EasyManuals Logo
Home>Tecsun>Receiver>PL-365

Tecsun PL-365 User Manual

Tecsun PL-365
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
TECSUN RADIOS AUSTRALIA
24/9 Powells Road, Brookvale, NSW 2100 Australia
Ph: +61 2 9939 4377
Email: info@tecsunradios.com.au
www.tecsunradios.com.au
13
When the radio is turned on by the alarm function with radio,
you can short press [POWER] button to continue listening
radio afterwards.
Short press [POWER] again to turn off the radio.
TURN OFF THE ALARM
In radio off mode, short press the [DISPLAY] button to
view the temperature or alarm time.
In radio on mode, short press the [DISPLAY] button to
view the alarm time, temperature, local time, signal
strength/SNR.
DISPLAY MODE
To activate the key lock function, press & hold the [ ]
button; the " " symbol appears on the display. Press &
hold the [ ] button again to unlock.
KEY LOCK FUNCTION
When listening to FM stations via earphones, press the
[FM. ST] button; if the station is transmitted in stereo the
" " symbol appears on the left side of the display.
FM ST. (FM STEREO) BUTTON
8
Method 4: AUTO BROWSE MEMORY
1. Turn on the radio to enter memory
mode. Short press the [VF/VM]
button until the memory position
flashes in the upper right corner
and disappears after 3 seconds.
2. Long press the [VF/VM] button
until "Preset" flashes. The
memory is now being browsed,
staying on each stored station for
about 3 seconds.
3. To stop browsing, press the
[VF/VM] button.
Note: Please read the "Working with Memories" section
before using this function.
flashing
Auto-scan memory with
pre-listening
SLEEP
( )
SINGLE SIDE BAND SSB
1. In any mode, press the [USB/LSB]
button to select SSB reception;
press again to select USB/LSB.
2. Turn the [TUNING] knob to search
stored SSB stations.
3. Press the [BFO] button, when “U” /
“L” flashes on the display, turn the
[TUNING] knob to adjust the
reception.
- " " is for USB.
- " " is for LSB.
When it is off, press and hold the [BFO] button to set the
fine tuning step. (P.15)
Exit SSB: Press and hold the [USB/LSB] button to exit.
SLEEP
SSB fine tuning frequency

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tecsun PL-365 and is the answer not in the manual?

Tecsun PL-365 Specifications

Frequency Range IconFrequency Range
FM frequency range87~108 MHz
Japan FM frequency range76~108 MHz
EU, USA FM frequency range87.5~108 MHz
MW frequency range522~1620 (150~1620) kHz
USA MW frequency range520~1710 kHz
SW frequency range1711~29999 kHz
Sensitivity IconSensitivity
FM sensitivity (S/N=30dB)Less than 3μV
MW sensitivity (S/N=26dB)Less than 1mV/m
LW sensitivity (S/N=26dB)Less than 10mV/m
SW sensitivity (S/N=26dB)Less than 30μV
SSB sensitivity (S/N=10dB)Less than 3μV
Selectivity and Stereo Crosstalk IconSelectivity and Stereo Crosstalk
FM selectivity>60 dB
MW selectivity>60 dB
LW selectivity>60 dB
SW selectivity>60 dB
FM Stereo crosstalkLess than 25 dB
Power and Output IconPower and Output
Memory capacity550
Output power350 mW
Battery typeUM3 or AA X 3
USB power5V DC
Speaker and Connectivity IconSpeaker and Connectivity
Speaker specificationsΦ40mm, 500mW/16 Ohm
Earphone jack specificationsΦ3.5mm, 8~32 Ohm, Stereo type
Weight and Dimensions IconWeight and Dimensions
DimensionsApprox. 53(W) X 159(H) X 26(D) mm
Weight128g (Batteries not included)

Related product manuals