EasyManuals Logo
Home>Tecsun>Receiver>PL-365

Tecsun PL-365 User Manual

Tecsun PL-365
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
TECSUN RADIOS AUSTRALIA
24/9 Powells Road, Brookvale, NSW 2100 Australia
Ph: +61 2 9939 4377
Email: info@tecsunradios.com.au
www.tecsunradios.com.au
4
LCD DISPLAY
Battery consumption indicator /
Charging indicator
1
2
Sleep timer indicator
3
Alarm on/off indicator
6
Signal indicators
dBu: signal strength unit
dB : Signal to Noise Ratio
(S/N) unit
7
8
SW meter band indicator
9
ETM indicator
4
Temperature (Temp.)
5
10
11
kHz: frequency unit for
MW& SW
MHz: frequency unit for FM
15
Key-lock indicator
12
14
Digital number display
With radio off: local time
With radio on: frequency display,
band display
FM stereo status indicator
16
Band indicator
Alarm time indicator
Preset memory address
13
Rechargeable batteries indicator
1
2 3 4
5
6
7
8
9
10
14
15
16
13
SLEEP
Temp.
12 11
17
USING THE INTELLIGENT CHARGING FUNCTION
Connect USB 5V to external
power sources
In power off mode, install 3 x UM3 (AA size) rechargeable
(Ni-MH) batteries. Press & hold the [ ] button until
" and the "Ni-MH Battery" symbol appear on the
display.
1. Use any 5V external adaptor with USB plug to connect
this radio, the symbol " " will advance from the bottom
to top during power charging. It stops when batteries are
fully charged.
2. You can also use any USB cable
to connect the radio with your PC
for charging.
Notes for charging power:
Do not mix new and used batteries, or batteries of different
charging capacity.
Caution: Do not attempt to charge non-rechargeable
batteries, this will damage both the device and the batteries.
Digital number display (4 Digits)
With radio off: local time, alarm
time, temperature
With radio on: local time, signal
strength / SNR, alarm time,
temperature, memory address,
meter band, SSB fine tuning
frequency.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tecsun PL-365 and is the answer not in the manual?

Tecsun PL-365 Specifications

Frequency Range IconFrequency Range
FM frequency range87~108 MHz
Japan FM frequency range76~108 MHz
EU, USA FM frequency range87.5~108 MHz
MW frequency range522~1620 (150~1620) kHz
USA MW frequency range520~1710 kHz
SW frequency range1711~29999 kHz
Sensitivity IconSensitivity
FM sensitivity (S/N=30dB)Less than 3μV
MW sensitivity (S/N=26dB)Less than 1mV/m
LW sensitivity (S/N=26dB)Less than 10mV/m
SW sensitivity (S/N=26dB)Less than 30μV
SSB sensitivity (S/N=10dB)Less than 3μV
Selectivity and Stereo Crosstalk IconSelectivity and Stereo Crosstalk
FM selectivity>60 dB
MW selectivity>60 dB
LW selectivity>60 dB
SW selectivity>60 dB
FM Stereo crosstalkLess than 25 dB
Power and Output IconPower and Output
Memory capacity550
Output power350 mW
Battery typeUM3 or AA X 3
USB power5V DC
Speaker and Connectivity IconSpeaker and Connectivity
Speaker specificationsΦ40mm, 500mW/16 Ohm
Earphone jack specificationsΦ3.5mm, 8~32 Ohm, Stereo type
Weight and Dimensions IconWeight and Dimensions
DimensionsApprox. 53(W) X 159(H) X 26(D) mm
Weight128g (Batteries not included)

Related product manuals