General Information—2213A Operators
CALIBRATION
Instrument performance should be checked after every
2000 hours of operation or once each year if used infre
quently. A more frequent interval may be necessary if your
instrument is subjected to harsh environments or severe
usage.
REPACKAGING FOR SHIPMENT
If the instrument is to be shipped to a Tektronix Service
Center for service or repair, attach a tag showing; owner
(with address) and the name of an individual at your firm
that can be contacted. Include complete instrument serial
number and a description of the service required.
Save and reuse the package in which your instrument
was shipped. If the original packaging is unfit for use or not
available, repackage the instrument as follows:
Surround the instrument with polyethylene sheeting to
protect its finish. Obtain a carton of corrugated cardboard
having a carton test strength of 275 pounds and having
inside dimensions of no less than six inches more than the
instrument dimensions. Cushion the instrument by tightly
packing three inches of dunnage or urethane foam between
carton and instrument, on all sides. Seal carton with ship
ping tape or industrial stapler.
ADD DEC 1983
1-9
To Next Page
Loading...
Need help?
General
