Tektronix AFG3000C Series User Manual

Operating basics
Arbitrary Waveform Edit
Example 1
The following e
xample shows how to use the Line edit function. Paste a ramp
waveform before sine waveform:
1. Select Number of
Points to set the
number of waveform
points to 1000 points.
2. Select New and then
select Sine. Save this
waveform to U ser1.
3. Next, create a 500
point ramp waveform.
4. Select Operation and
select Line. Do the
following line edit:
X1: 1, Y1: 8191
X2: 250, Y2: 16382
Push Execute. Once
again, select Line from
Operation and perform
the follow ing line edit:
X1: 251, Y1: 16382
X2: 500, Y2: 8191
5. Push Execute. Save
this wav eform to
User2.
6. Next, paste a
waveform. Push Read
from... and select
User1.
7. Push Paste at
Beginning. Select
User2 waveform and
then select Paste.
8. The waveform shown
here is created.
AFG3000 and AFG3000C Series User Manual 51

Tektronix AFG3000C Series Specifications

General

Brand	Tektronix
Model	AFG3000C Series
Category	Inverter
Language	English