Replaceable Parts
This section contains a list of the replaceable modules for the AWG7000 Series
Arbitrary Waveform Generators. Use this list to identify and order replacement
parts.
Parts Order
ing Information
Replacement parts are available through your local Tektronix field office or
representative.
Changes to Tektronix instruments are sometimes made to accommodate improved
components as they become available and to give you the benefit of the latest
circuit i
mprovements. Therefore, when ordering parts, it is important to include
the following information in your order.
Part num
ber
Instrument type or model number
Instrument ser ial number
Instrument modification number, if applicable
If you order a part that has been replaced with a different or improved part, y our
local Tektronix field office or representative will contact you concerning any
change in part number.
Part Number Revision
Level
Tektronix part numbers contain two digits that show the revision level of the
part. For most parts in this manual, you will find the letters XX in place of the
revision level number.
When you order parts, Tektronix will provide you with the most current part for
your product type, serial number, and modification (if applicable). At the time of
your order, Tektronix will determine the part number revision level needed for
your product, based on the information you provide.
AWG7000B and AWG7000C Series Service Manual 5–1
To Next Page
Loading...
Need help?
General
