Tektronix AWG7000B Series User Manual

Removal and Installation Procedures
Procedures fo
r External Modules
Handle Unit
You need a screwdriver with a T-20 Torx tip (items 1 and 4).
Removal. To r
emove the handle unit, follow these steps: (See Figure 4-4 on
page 4-11.)
1. Remove the t
wo screws securing the handle base bracket to the cosmetic
cover.
2. Grasp the b
racket and handle away from the cosmetic cover.
Installation. To install, reverse this procedure.
Snaps
You need
a screwdriver with a T-15 Torx tip (items 1 and 2).
Removal. To remove the snaps, follow these steps: (See Figure 4-4 on page 4-11.)
1. Remove the four screws securing the snaps to the cosmetic cover.
2. Lift the snaps away from the cosmetic cover.
Installation. To install, reverse this procedure.
4–10 AWG7000B and AWG7000C Series Service Manual

Tektronix AWG7000B Series Specifications

General

Brand	Tektronix
Model	AWG7000B Series
Category	Portable Generator
Language	English