Tektronix DPO2012 User Manual

Analyze Waveform Data
Miscellaneous Measurements (cont.)
Measurement Description
Rising Edge
Count
The number of positive transitions from the low reference value to the high reference value
in the waveform o r gated region.
Falling Edge
Count
The number of negative transitions from the high reference value to the low r efere nce value
in the waveform o r gated region.
Area A voltag e over time measurement. The measurement returns the area over the entire
waveform or gated region in volt-seconds. Are a m easured above ground is positive; area
measured below ground is negative.
Cycle Area A voltage over time measurement. The measurement is the area over the first cycle in the
waveform or the first cycle in the gated region expressed in volt-seconds. The area above
the common reference point is positive, and the area below the co mmon referen ce point is
negative.
180 DPO2000 and MSO2000 S eries Oscilloscopes User Manual

Tektronix DPO2012 Specifications

General

Brand	Tektronix
Model	DPO2012
Category	Test Equipment
Language	English