Acquire the Signal
Quick Tip
Use the zoom feature to see multiple cycles of your signal in the uppe r part, and a single cycle in the lower part of the display.
(See page 198, Using Wave Inspector to Mana ge Long Record Length Waveforms.)
Labeling Channels and Buses
You can add a label to the channels and buse s shown on the display for easy identi fication. The label is placed on the waveform
baseline indicator in the left side of the screen. Th e label can have up to 32 c haracters.
To label a channel, pu s h a cha nnel input button for an analog channel to label a channel.
1. Push a front panel button for an input channel
or a bus.
DPO2000 and MSO2000 Series Oscilloscopes User Man ual 77
To Next Page
Loading...
Need help?
General
