Getting Acquainted with the Oscilloscope
11. R.Pushtomanag
e reference waveforms, including the display or removal of
each reference waveform from the display.
12. M. Push to manage the math waveform, including the display or removal of
the math waveform from the dis play.
Using Other Controls
These buttons and knobs control waveforms, cursors, a
nd other data input.
1. Turn the upper multipurpose knob a, when activated, to move a cursor, to set a
numerical parameter value for a menu item, or to select from a pop-out list of
choices. Push the Fine button to toggle between coarse and fine adjustment.
Screen icons tell you when a or b are active.
2. Cursors. Push once to activate the two vertical cursors. Push again to turn on
the two vertical and two horizontal cursors. Push again to turn off all cursors.
When the cursors are o n, you can turn the multipurpose knobs to control
their position.
3. Select. Push to activate special functions.
For example, when using the two vertical cursors (and no horizontal ones are
visible), you can push this button to link or unlink the cursors. When the two
vertical and two horizontal cursors are both visible, you can push this button
to make either the vertical cursors or the horizontal cursors active.
4. FilterVu.Pushtofilter unwanted noise from your signal and still capture
glitches.
5. Fine. Push to toggle between making coarse and fine adjustments with the
vertical and horizontal position knobs, the trigger level knob, and many
operations of multipurpose knobs a and b
6. Intensity. Push to enable multipurpose knob a to control waveform display
intensity and knob b to control graticule intensity.
7. Turn the lower multipurpose knob b, when activated, to move a cursor or set a
numerical parameter value for a menu item. Push Fine to make adjustments
more slowly.
MSO2000B and DPO2000B Installation and Safety Instructions 27
To Next Page
Loading...
Need help?
General
