Getting Acquainted with the Oscilloscope
25. Print. Push to print to a PictBridge printer.
26. Power sw
itch. Push to power on or off the oscilloscope.
27. USB 2.0 Host port. Insert a USB peripheral to the oscilloscope, s uch as
akeybo
ard or a flash drive.
28. Save. Push to perform an immediate save operation. The save operation uses
the cu
rrent save parameters, as defined in the Save / Recall menu.
29. Default Setup. Push to perform an immediate restore of the oscilloscope
to the
default settings.
30. D15 - D0. Push to display or remove the digital channels from the display,
and t
o access the digital channel setup menu (MSO2000B series only).
31. Menu Off. Push to clear a displayed menu from the screen.
32. Waveform Only. Pushtoremovemenuandreadoutinformationfromthe
screen so the oscilloscope only displays the waveform or bus. Push a second
ti
me to recall the previous menu and readout information.
30 MSO2000B and DPO2000B Installation and Safety Instructions
To Next Page
Loading...
Need help?
General
