Tektronix Keithley 2260B Series User Manual

2260B Series User Manual
100
Steps
1. Select T-04 (Test Sequence
Remove) and choose which test
sequence to remove from the
internal memory.
Page 95
T-04 range
1~10
2. The test sequence will be removed from the
internal memory slot.
Note
Error messages: If you try to remove a test
sequence from an empty memory location “Err
003” will be displayed on the display.
Test Sequence Error Messages
Overview
The following error code numbers may appear
on the display when trying to run a test
sequence. Use the error code numbers
determine the cause of the error.
For example: If Error # -52 appears on the
display, it indicates that one of the Time(sec)
fields is over range for the test sequence.
Error #
Details
-1
_SEQ_ERR__FILE_NOT_FOUND
-2
_SEQ_ERR__FILE_IS_TOO_LARGE
-3
_SEQ_ERR__ALLOCATE_MEMORY_ERROR
-4
_SEQ_ERR__OPEN_THE_FILE_ERROR
-5
_SEQ_ERR__READ_DATA_ERROR
-6
_SEQ_ERR__USING
-7
_SEQ_ERR__FORMAT_ERROR

Tektronix Keithley 2260B Series Specifications

General

Brand	Tektronix
Model	Keithley 2260B Series
Category	Power Supply
Language	English