Operating Requirements
Table 3: Environmental specifications, (cont.)
Characteristic Description
Operating 3,000 m (9,842 ft)
Altitude
Nonoperating
12,000 m (39,370 ft)
Physical Specifications
Table 4: Physical specifications
Characteristic Description
Height
203.2 mm (8 inches) handle down, 254 mm (10.3 inches) handle up
Width
416.6 m m (16.4 inches) max
Dimensions
Depth
147.4 m m (5.8 inches) max
Net
4.2 kg (9.2 lbs), stand-alone instrument.
6.8 kg ( 15 lbs), w ith accessories and carry case.
Weight
Shipping 8.6 kg. (19 lbs), when packaged for domestic shipment
Cleaning
Inspect the oscilloscope and probes as often as operating conditions require. To
cle
an the exterior surface, perform the following s t eps:
1. Remove loose dust on the outside of the oscilloscope and probes with a
li
nt-free cloth. Use care to avoid scratching the clear glass display filter.
2. Use a soft cloth dampened with water to clean the oscilloscope. Use an
aq
ueous solution of 75% isopropyl alcohol for more efficient cleaning.
CAUTION. Avoid getting moisture inside the unit during external cleaning. Use
only enough cleaning solution to dampen the cloth or swab.
CAUTION. To avoid damage to the surface of the oscilloscope or probes, do not
use any abrasive or chemical cleaning agents.
18 MDO3000 Installation and Safety Instructions
To Next Page
Loading...
Need help?
General
