Installation
Powering off the Oscilloscope
To power off the oscilloscope and remove the power cord:
1. Push the power button on the instrument front-panel to turn the instrument off.
2. If you want to remove power completely, disconnect the power cord from the rear-panel of the i nstrument.
Functional Check
Perform this quick functional check to verify that your oscilloscope is operating correctly.
1. Connect the oscilloscope power cable
as described in Powering On the
Oscilloscope. (See page 9.)
2. P ower on the oscilloscope.
10 MDO3000 Series Oscilloscopes User Manual
To Next Page
Loading...
Need help?
General
