Tektronix MDO3054 User Manual

Save and Recall I
nformation
5. Save the file.
Save to
Selected
File
Quick Tips
Recalling the Default Setup . Push Default Setup on the front panel to initialize the oscilloscope to a known setup.
(See page 57, Using the Default Setup.)
Saving with One B utton Push
After you have de fined the save/recall parameters with the Save/Recall Menu button and menu, you can save files with a
single pus
hoftheSave button. For example, if you have defined the save operation to save waveform data to a USB flash
drive, then each push of the Save button will save current waveform data to the defined USB flash drive.
1. To define the Save button behavior, push
Save/Recall Menu.
2. Push Assign Save to ....
Save
Screen
Image
Save
Waveform
Save
Setup
Recall
Waveform
Recall
Setup
Assign
Save|to
Setup
File
Utilities
3. P ush the side menu button corresponding to
the items or items you wish to save when
youpushtheSave button.
Assign
Save to
Screen
Image
Waveform
Setup
Image,
Waveform,
and Setup
4. From now on, when you push Save the
oscilloscope will perform the action that you
just spec ified rather than requiring you to
navigate through the menus each time.
170 MDO3000 Series Oscilloscopes User Manual

Tektronix MDO3054 Specifications

General

Brand	Tektronix
Model	MDO3054
Category	Test Equipment
Language	English