Installation
12. You can now type
in a standard query, such
as,
*idn?.
The Telnet session window will respond by
displaying a c
haracter string describing your
instrument.
You can type in more queries and view
more results
using this Telnet session
window. You can find the syntax for relevant
commands, queries and related status
codes in the M
DO3000 Series Programmer
Manual.
NOTE. Do not use the computer’s backspace
key during a
n MS W indows Telnet session with
the oscilloscope.
Connecti
ng a USB Keyboard to Your Oscilloscope
You can connect a USB keyboard to a USB Host port on the rear or front panel of the oscilloscope. The oscilloscope will
detect the keyboard, even if it is plugged in while the oscilloscope is powered on.
You can use the keyboard to quickly create names or labels. You can bring u p the Label button on the lower menu by
pushing a C hannel or Bus button. Use the arrow keys on the keyboard to move the insertion point, and then type in a name
or label. Labeling channels and buses makes the information on the screen easier to identify.
To choose whether to use a keyboard with a United States (US) key layout or one with an alternative layout:
1. Push Utility.
2. Push Utility Page.
Utility
Page
Confi
g
Language
Set Da
te &
Time
About Manage
Modules &
Optio
ns
3. Turn Multipurpose a and select Config.
4. Push Language on the lower menu.
5. Push USB Keyboard on the side m enu.
6. Turn Multipurpose a and select the desired
ke
yboard layout style from the resulting
menu.
MDO3000 Series Oscilloscopes User Manual 35
To Next Page
Loading...
Need help?
General
