Specifications
1-8
TDS1000B and TDS2000B Series Oscilloscope Service Manual
Table 1- 2:
Oscilloscope general specifications
Display
Display Type 145 mm (5.7 in) diagonal liquid crystal
Display Resolution 320 horizontal by 240 vertical pixels
Display Contrast* Adjustable, temperature compensated
Backlight Intensit y, typical Monochrome display Color display
75 cd/m
2
65 cd/m
2
Probe compensator output
Output Voltage, typical 5Vinto≥ 1MΩ load
Frequency, typical 1 kHz
Power Source
Source Voltage
100 -- 240 VAC
RMS
( 10%) 50/60 Hz ( 10%)
115 VAC
RMS
( 10%) 400 Hz ( 10%)
Power Consumption Less than 30 W
Fuse 1 A, T rating, 250 V
Environmental
Pollution Degree Pollution degree 2{, for indoor use only. Do not operate in an environment where conductive pollutants
may be present.
Temperature Operating 0 °Cto+50°C(32°F to 122 °F)
Non-Operating -- 4 0 °Cto+71°C(--40°F to 159.8 °F)
Cooling Method Convection
Humidity +40 °C or below
(+104 °F or below)
5% to 85% relative humidity
+41 °Cto+50°C
(106 °F to 122 °F)
5% to 45% relative humidity
>+50 °Cto+71°C
(>122 °F to 160 °F)
Wet bulb temperature of < 37 °C, which is 12% at +71 °C
Altitude 3,000 m (approximately 10, 000 ft.)
Random Vibration Operating 0.31 g
RMS
from 5 Hz to 500 Hz, 10 minutes on each axis
Non-Operating 2.46 g
RMS
from 5 Hz to 500 Hz, 10 minutes on each axis
Mechanical Shock Operating 50 g, 11 ms, half sine
To Next Page
Loading...
Need help?
General
