Reference
Removing Refe rence Waveforms from the Display. To rem ove a reference
waveform from the display, s elect that reference waveform and then
push the Waveform Off button
.
Scaling and Position ing a Reference Waveform. You can position and
scale a reference waveform independently from all other displayed
waveforms. Select the refere
nce waveform and then adjust it with a
vertical or horizontal Position or Scale control. You can do this whether
acquisition is running or is stopped.
If a reference waveform is selected, scaling and repositioning of the
reference waveform operates t he same way whether zo om is turned
on or off.
Gray-Scale Restriction. Reference waveforms are always saved from the
most current acquisition and do not contain any gray -scale information.
NOTE. The TDS3AAM Ad vanc ed Analysis application m odu le adds new
math features, including arbitrary math expressions, DPO (gray scale)
math waveforms, and FFT analysis.
e*Scope Web-Ba
sed Remote Control
With e*Scope, you can access any Internet-connected TDS3000C
series oscil
loscope from a browser on your w ork station, PC, or laptop
computer. No matter where y ou are, y our TDS3000C oscilloscope is as
close as the nearest browser.
There are two levels to e*Scope: basic and advanced. The basic level,
which is hosted on the osci llo scope, lets you view a screen image of the
current a
cquisition, save o r load waveform and setup files, and send
textual control an d query commands to the o scilloscope.
The adva
nced level, which is hosted on your system , provides a
graphical interface to view autom atically updated screen images
and to remotely control the oscilloscope. You can access the
www.te
ktronix.com/software Web page an d download the free advanced
e*Scope Web-based Remote Control software.
144 TDS3000C Series Oscilloscope User Manual
To Next Page
Loading...
Need help?
General
