Version1.0
55
9 Operating mode
To access the page, choose Working Mode.
On this page, you can view and switch the working mode of the WiFi extender.
9.1 Switch the WiFi extender from extender mode
to AP mode
In AP mode, the WiFi extender is connected to the upstream device using an Ethernet cable to
extend the network coverage.
Suppose that the WiFi extender is working in the extender mode. You have a gateway which has
connected to the internet but does not support WiFi in your house or cannot cover the area
you want. To expand the network coverage in your house, you can switch the WiFi extender from
extender mode to AP mode.
Configuration procedure:
Step 1 Start a web browser on the computer connected to the WiFi extender, and enter
re.tenda.cn in the address bar to access the web UI of the WiFi extender...
Step 2 Click Working Mode.
Step 3 Find AP Mode, then click Switch Mode...