4
P3
LED Indicators for P3
The device is NOT connected to a power supply.
The device is connected to a power supply.
The device is in power saving mode.
The device does not pair with other powerline devices, or is
powered off.
The device is connected to a powerline network.
The device is pairing with a powerline device.
The powerline signal of P3 is poor; try plugging the adapter closer
to your router or modem until this LED turns green.
No Ethernet cable is detected on the Ethernet port.
The Ethernet cable is connected properly.
Used to connect to a router, computer, and so on.