Tenda P3 User Manual

5
Pair/Reset
Press it to perform pairing process.
Hold it down for about 6 seconds to restore factory settings.
1.5 Installation Requirement
Take PA6 as an example.
 Plug PA6 directly into a wall receptacle. Do not plug it into power strip or extension cord.
 Avoid plugging the powerline devices near the appliances that consume a lot of power, such as washers,
dryers, or electric kettle.
 Keep the powerline device right side up.
 Installation Environment Requirement
Operating Temperature: 0°C~40°C
Operating Humidity: (10~90) % RH, non-condensing

Tenda P3 Specifications

General

Brand	Tenda
Model	P3
Category	Extender
Language	English